Battery Holder AA x 4 Cell With Cover – Black Plastic Box
1. Holds 4 AA batteries
2. With a cover and fixed screw
3. Dimensions mm (LxWxH): 70 x 64 x 18
4. Weight: 32 gm
5. Material: Plastic
6. Internal Connection: Series
BC547 NPN DIP Transistor – 1 Piece
1. BC547 is a bipolar junction transistor (BJT).
2. It is kind of an NPN transistor.
3. It has three terminals: Emitter, Collector and Base.
4. The maximum current gain of BC547 is 800A.
BO Wheel – Yellow
1. Tire with sponge liner for more strength
2. With upgraded tire tread for greater friction
3. New design wheel for better combination with the motor
4. Diameter: 65 mm
5. Width : 28 mm
6. The material of Wheel: High-strength plastic
7. The material of Tyre: Rubber
8. Color: Yellow
BSS138 – 4-Channel I2C-Safe Bi-Directional Logic Level Converter
1. Material: ABS + metal
2. Dimensions: 16 x13 x 3 (L x W x H) mm
3. Weight: 2gm
4. Mutual transform between 5V TTL and 3.3V TTL
5. Four channels of logic and high voltage low voltage logic can two-way transform
6. Portable and lightness, with 2 rows 6 pin contact pins
Buzzer Module
1. Operating voltage 3.3V-5V
2. PCB Dimension: 3.1cm*1.3cm.
3. Color: Blue
4. Easy to use
Capacitive soil moisture sensor V2.0
1. Operating Voltage: 3.3 ~ 5.5 VDC.
2. Operating Current: 5mA.
3. Interface: PH2.54-3P.
4. Dimensions mm(LxWxH): 98 x 23 x 4.
5. Supports 3-Pin Gravity Sensor interface
6. Analog output.
7. Weight (gm): 15.
CNC Shield For A4988
1. Latest Arduino CNC Shield Version 3.10
2. GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
3. Coolant enable
4. Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
5. Compact design.
6. 4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13)
7. 2 x End stops for each axis (6 in total)
Comparator – LM393
1. Power and Signal indicator LED
2. Analog and Digital Out
3. Adjustable threshold (via potentiometer)
4. Input Voltage (V): 3.3 to 5
Data Logging Shield For Arduino
1. SD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents damage to your SD card.
2. Real-time clock (RTC) keeps the time going even when the Arduino is unplugged. The battery backup lasts for years.
3. Included libraries and example code for both SD and RTC mean you can get going quickly Prototyping area for soldering connectors, circuitry or sensors.
4. The onboard 3.3v regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run.
5. A dedicated and well-designed data logging shield for Arduino.
DC 12v to 3.3v 5v TTL module
1. Input Voltage: 12V
2. Connector: 5.5mm DC Jack
3. Output power on/off switch
4. Two-row multiple pin outputs, easy to use and connect
5. Outputs
o 3.3V DC at 800mA maximum current
o 5.0V DC at 800mA maximum current
o 12V DC (the 12V output is directly connected to the input, i.e. with 12VDC input, this output will be 12VDC; with 9VDC input, this output will be 9VDC)
DF Mini MP3 Player Module
1. Supports sampling rates (KHz): 8 / 11.025 / 12/16 / 22.05 / 24/32 / 44.1 / 48
2. 24-bit DAC output, dynamic range support: 90dB, SNR support: 85dB
3. Fully supports FAT16, FAT32 file system
4. Maximum support 32G TF card
5. Support U disk to 32G, 64M bytes of NORFLASH
6. A variety of control modes are available. IO control mode, serial mode, AD key control mode
DHT11 – Humidity and Temperature Sensor
1. Input Supply Voltage (VDC): 3.3 ~ 5.
2. Supply Current (mA): measurement 0.3mA standby 60μA.
3. Temperature measurement range: 0~50 degrees.
4. Temperature measurement error: ±2 degrees.
5. Humidity measurement range: 20%~95%RH.
6. Humidity measurement error: ±5%RH.