A High Current Active Alarm Buzzer Driver Module is an audio signaling device, which may be mechanical, electromechanical, or piezoelectric. Just like what you are viewing now, it is 5V DC Electronic Part Active Buzzer Module. Using top quality material, it is durable in use.
Features:
1. An active buzzer with a concussion internal source- so long as it will be called an energized.
2. The program easy to control- SCM can let a high-low sound- while passive buzzer did not.
![](https://kazrotech.com/wp-content/uploads/2022/06/BuzzerModuleA-150x150.jpg)
![](https://kazrotech.com/wp-content/uploads/2022/06/BuzzerModuleB-150x150.jpg)
Buzzer Module
₹41.00 Original price was: ₹41.00.₹40.00Current price is: ₹40.00.
Price Summary
- ₹41.00
- ₹40.00
- 2%
- ₹40.00
- Overall you save ₹1.00 (2%) on this product
1. Operating voltage 3.3V-5V
2. PCB Dimension: 3.1cm*1.3cm.
3. Color: Blue
4. Easy to use
Weight | 0.11 kg |
---|---|
Dimensions | 8 × 5 × 2 cm |
Be the first to review “Buzzer Module” Cancel reply
Related Products
Pulse Sensor – Heart Rate Detector
1. A Color-Coded Cable, with a standard male header connectors. Plug it straight into an Arduino or a Breadboard. No soldering is required.
2. The Pulse Sensor has 3 holes around the outside edge which make it easy to sew it into almost anything.
3. Visualization software (made in Processing) to instantly see the output of the sensor and for troubleshooting.
Analog Hall Magnetic Sensor Module
1. Operating Voltage: 3.3V-5V
2. Features wide range voltage comparator LM393
3. Adjustable sensitivity
4. Signal output indicator with the retaining bolt hole, convenient installation
5. Output form digital switch output (0 and 1 high and low level)
6. The output effective signal is low level
7. When there is sound, outputs low level and the signal light
LM386 Audio Amplifier Module
1. Onboard LM386 Chip.
2. 200 multiplier benefits circuit design.
3. On-board speaker wiring Block.
4. On-board 10K variable resistor, you can adjust the volume of the enlarged.
5. Onboard power indicator.
Magnetic Switch Wired Door Sensor MC-38
1. Actuation Distance : 15 – 25 mm;
2. Connecting cable length: 30 cm.
3. Magnetic sensor alarm, control the switch of the circuit via the built-in magnet
4. Alarm when someone intrudes into your places
5. Can be used in places like apartment, hotel, office, etc.
TILT SENSOR SW420
1. Using SW-420 normally closed type vibration sensor
2. Comparator output, clean signal, good waveform, strong driving ability, >15mA
3. Operating voltage 3.3V ~ 5V
4. Output format: digital switching output (0 and 1)
5. Using a wide voltage LM393 comparator
6. With bolt holes for easy installation
Pir Sensor HC-SR501
1. Wide Working Voltage Range: DC 4.5V- 20V
2. Current Drain: <60uA
3. Detection Angle: <140°
4. Detection Distance: 3 to 7m (can be adjusted)
5. Blockade time: 2.5s (Default)
6. Work temperature: -20-+80°C
NTC Temprature Sensor module
1. Adopt the NTC thermistor sensor, sensitivity is good
2. The comparator output, signal clean, good waveform, driving ability is strong, for more than 15 ma.
3. With potentiometer to adjust the temperature detection threshold
4. Working voltage: 3.3 V to 5 V
5. Output form: digital switch output (0 and 1)
6. It has a fixed bolt hole, convenient installation
KY-039 Finger Detection Heartbeat Measuring Sensor Module
1. Use IR LED and an optical transistor to detect pulsation in fingers
2. Small and Compact module
3. Easy to use.
TCRT5000 SENSOR Module
1. Operating Voltage: 3.5V-5V
2. Supply Current: 15mA
3. Optimal Sensing Distance: 3mm
4. Designed with the reflected infrared sensor, indicator light.
5. Built in a potentiometer for sensitivity control.
6. On-board LM393 voltage comparator chip and infrared sensing probe TCRT5000L
7. Signal detection sensitivity can adjust
8. Reserve all the way more circuits (P3 voltage drawn)
LDR 5MM
1. Diameter: 5mm
2. No. of Pins: 2
3. Type of Mounting: PCB Through Hole
4. Maximum Operating Temperature: +800°C (Approx.)
5. Dark resistance:1-20 Mohm
Vibration Sensor SW1801P
1. The working voltage of 3.3V-5V.
2. Using the company’s high-sensitivity vibration switch, the default with SW-18015P vibration sensor.
3. The comparator output, the signal clean, good waveform, driving ability, more than 15mA
4. With a fixed bolt hole, easy to install.
5. The use of wide voltage LM393 comparator.
Raspberry Pi Camera – 5MP
1. Resolution: 5 MP
2. Interface Type: CSI(Camera Serial Interface)
3. Dimensions: 25x23x8 (LxWxH) mm
4. Supported Video Formats: 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 video
5. Fully Compatible with Raspberry Pi 3 and 4 Model B
6. Plug-n-Play camera for Raspberry Pi 3 and 4 Model B.
There are no reviews yet.