Arduino 33 IOT
Highlights:
1. Microcontroller: SAMD21 Cortex-M0+ 32bit low power ARM MCU
2. Radio module: u-blox NINA-W102
3. Secure Element: ATECC608A
4. IMU: LSM6DS3
5. Clock Speed: 48MHz
6. Operating Voltage: 3.3V
Arduino Leonardo – Compatible
Highlights:
1. Microcontroller: ATmega32u4
2. Operating Voltage: 5V
3. Input Voltage (Recommended): 7-12V
4. Input Voltage (limits): 6-20V
5. Digital I/O Pins: 20
6. PWM Channels: 7
7. Analog Input Channels: 12
Arduino Lilypad Attiny85 – Compatible
Highlights:
1. Miniature ATtiny85 microcontroller
2. Wearable
3. Dimensions: Diameter 25mm
4. CJMCU-ATTINY85 miniature microcontroller development board
5. 8K Byte of In-System Programmable Program Memory Flash
6. 512 Bytes In-System Programmable EEPROM
7. 512 Bytes Internal SRAM
Arduino Mega 2560 – CH340 Compatible
Highlights:
1. 54 digital input / output terminals (14 of which have programmable PWM outputs).
2. 16 analog inputs.
3. 4 UARTs (hardware serial ports).
4. 16 MHz crystal clock.
5. Operating voltage: 6 ~ 12v.
6. Dimensions: 110 x 53 x 15 mm.
Arduino Mega2560 With ESP Wifi (CH340)
Highlights:
It is a customized version of the classic ARDUINO MEGA R3 board. Full integration of Atmel ATmega2560 microcontroller and ESP8266 Wi-Fi IC, with 32 Mb (megabits) of flash memory, and CH340G USB-TTL converter on a single board! All components can be set up to work together or independently.
Arduino Nano CH340 – Compatible
Highlights:
1. Operating Voltage (logic level): 5V
2. 8 analog inputs ports: A0 ~ A7
3. 14 Digital input / output ports: TX, RX, D2 ~ D13
4. 1 pair of TTL level serial transceiver ports RX / TX
5. Using Atmel Atmega328P-AU MCU
6. Standard 0.1” spacing DIP (breadboard friendly).
Arduino Pro Micro 5v/16M – Compatible
Highlights:
1. ATMEGA32U4 running in 5V / 16MHz
2. Support Arduino IDE V1.0.1
3. Micro USB interface programming on the board
4. Four 10-bit ADC pin
5. 12 digital I / O (5 PWM capability)
6. Rx and Tx hardware serial connection
Arduino Pro Mini 3.3V / 8M – Compatible
Highlights:
1. Microcontroller: ATmega328
2. Circuit Operating Voltage: 3.3V
3. Clock frequency: 8MHz.
4. Digital I/O Pins: 14
5. 8 analog input port: A0 ~ A7.
6. A pair of TTL level serial port transceiver : RX / TX.
7. 6 PWM port: D3, D5, D6, D9, D10, D11.
8. Support serial download.
Arduino Pro Mini 5v/16M – Compatible
Highlights:
Microcontroller: ATmega328P
Circuit Operating Voltage: 5V
Clock frequency: 16MHz.
6 PWM port: D3, D5, D6, D9, D10, D11.
Use For Atmel Atmega328P-AU microcontroller.
Support serial download.
Support 9V battery.
A pair of TTL level serial port transceiver : RX / TX.
Arduino UNO SMD CH340 – Compatible
Highlights:
1. Micro-controller : ATmega328.
2. Operating Voltage : 5V.
3. Input Voltage (recommended) : 7-12V.
4. Digital I/O Pins : 14 (of which 6 provide PWM output).
5. Analog Input Pins : 6.