AVR ASP Programmer
Highlights:
1. Compatible Chips:
i. ATMega Series
ii. Tiny Series
iii. Classic Series
iv. CAN Series
v. PWM Series
BSS138 – 4-Channel I2C-Safe Bi-Directional Logic Level Converter
Highlights:
1. Material: ABS + metal
2. Dimensions: 16 x13 x 3 (L x W x H) mm
3. Weight: 2gm
4. Mutual transform between 5V TTL and 3.3V TTL
5. Four channels of logic and high voltage low voltage logic can two-way transform
6. Portable and lightness, with 2 rows 6 pin contact pins
Comparator – LM393
Highlights:
1. Power and Signal indicator LED
2. Analog and Digital Out
3. Adjustable threshold (via potentiometer)
4. Input Voltage (V): 3.3 to 5
DC 12v to 3.3v 5v TTL module
Highlights:
1. Input Voltage: 12V
2. Connector: 5.5mm DC Jack
3. Output power on/off switch
4. Two-row multiple pin outputs, easy to use and connect
5. Outputs
o 3.3V DC at 800mA maximum current
o 5.0V DC at 800mA maximum current
o 12V DC (the 12V output is directly connected to the input, i.e. with 12VDC input, this output will be 12VDC; with 9VDC input, this output will be 9VDC)
IIC/I2C Serial Interface Adapter Module
Highlights:
1. 5V power supply.
2. Serial I2C control of LCD display using PCF8574.
3. Backlight can be enabled or disabled via a jumper on the board.
4. Contrast control via a potentiometer.
5. Can have 8 modules on a single I2C bus (change address via solder jumpers)address, allowing.
Logic Level Converter module 3.3 V To 5V TTL
Highlights:
1. Material: Plastic + metal.
2. Colour: Red and Yellow.
3. Portable, small, easy to use.
4. Comes with 2 rows of 6 pin, unsoldered.
5. The compatible breadboard can be directly inserted into the breadboard.
Logic Level Converter module 5V To 3.3V TTL
Highlights:
1. Material: Plastic + metal.
2. Colour: Red and Yellow.
3. Portable, small, easy to use.
4. Comes with 2 rows of 6 pin, unsoldered.
5. The compatible breadboard can be directly inserted into the breadboard.
MT3608 DC-DC Boost 2A Module
Highlights:
1. It’s efficient up to 93%
2. It can source a good amount of current
3. The maximum output current: 2A
4. Input voltage: 2V-24V DC
5. The maximum output voltage: 5V-28V DC
PIC Programmer Adaptor
Highlights:
The PIC ICD2 PICKit2 PICKIT3 Universal Programming Adapter Programmer Board is designed to work in conjunction with the popular PICkit 2 or PICkit3 programmer.
USB to TTL CH340 Based
Highlights:
1. Built-in USB to TTL Transfer chip.
2. Designed to be used for USB to TTL electronic projects.
3. TTL interface output, easy to connect to your MCU.
4. Dual 3.3V and 5V Power output, work with 3.3v and 5 V target device.
5. The mini-module is designed specifically for STC download and ARDUINO PRO supports all series of STC
6. Supports WIN7/VISTA/MAC/LINUX(32 bit /64-bit system)