RFID Card 13.56MHz Thin
1. Contactless transmission of data and supply energy (no battery needed)
2. Operating distance: Up to 100mm (depending on antenna geometry)
3. Operating frequency: 13.56MHz
4. Data transfer: 106 kbit/s
5. Data integrity: 16 Bit CRC, parity, bit coding bit counting
6. Anticollision
7. Typical ticketing transaction: <100 ms ( including backup management)
RFID Keytag 13.56MHz
1. Material: ABS
2. Dimension(LxWxH): 43.7×30.5×5.3mm
3. Response Frequency: 13.56MHz
4. Chip type: FM1108 Fudan Chip
5. Memory capacity: 8 kbit
6. Designed for the RFID 13.56MHz duplicator. can copy all the ID card, such as Access Card, District Card, Parking etc.
RG1602 Parallel LCD Display – Blue
1. Model: LCD1602
2. Character Color: Black
3. Backlight: Blue
4. Supply voltage: 5V
5. Dimensions (L x W x H) mm. : 80 x 36 x 10
RG1602 Parallel LCD Display – Green
1. Model: LCD1602
2. Character Color: Black
3. Backlight: Yellow
4. Supply voltage: 5V
5. Dimensions (L x W x H) mm. : 80 x 36 x 10
SD Card Module for Arduino
1. All SD SPI pins output, MOSI, SCK, MISO, and CS.
2. Support 5V/3.3V input.
3. This module can handle 2GB SD cards.
4. Size:4.7 x 3.1 cm.
5. LED indicator.
6. SD Card Holder.
7. Onboard 3.3V regulator (AMS1117-3.3) for +5v to 3.3V generation. 3.3V is also available as output.
SG90 Servo Motor
1. 3 pole ferrite, all nylon gear
2. Top ball bearing
3. Model: SG90
4. Weight: 9 gm
5. Operating voltage: 3.0V~ 7.2V
6. Servo Plug: JR
7. Stall torque @4.8V : 1.2kg-cm
SIM800L TTL Board
1. TTL serial port for serial port, you can link directly to the micro-controller.
2. Don’t need MAX232.
3. Power module automatically boots, homing network.
4. Onboard signal lights all the way.
5. It flashes slowly when there is a signal, it flashes quickly when there is no signal.
SIM800L TTL Board (Orignal)
1. TTL serial port for serial port, you can link directly to the micro-controller.
2. Don’t need MAX232.
3. Power module automatically boots, homing network.
4. Onboard signal lights all the way.
5. It flashes slowly when there is a signal, it flashes quickly when there is no signa
Soil Moisture Sensor
1. Dual output mode, analog output more accurate
2. A fixed bolt hole for easy installation
3. With power indicator (red) and digital switching output indicator (green)
4. Having LM393 comparator chip, stable.
5. Operating Voltage: 3.3V~5V
Solderless BreadBoard 400 Points
1. 400 tie points
2. 2 Power lanes, Total 100 tie points in power lanes
3. 1 Double strip, Total 300 tie points
4. Perfect for Arduino shield prototyping and testing
5. Plastic housing, metal contact clips
Solenoid Valve 12V Normally Closed 1/2″
1. Rated Operating Voltage: 12V DC
2. Rated Current: 0.6A
3. Operation Mode: NC (Normally Closed)
4. Pressure: 0.02 – 0.8MPa
5. Max fluid temperature: 100°C
Sound Sensor Module
1. Main chip: LM393, Electret condenser microphone
2. Working voltage: DC 3.3-5V
3. Induction distance is 0.5M
4. Signal output Indication
5. Single channel signal output
6. The output effective signal is low level.