650nm 6mm 5V DC 5mW Mini Laser Dot Diode Module which is made of copper plastic. It is suitable for 3V 5mW standard, with 6mm outside diameter, can be used to connect diode tubes for multiple uses.



650NM Laser Diode
₹32.00 ₹35.00
Price Summary
- ₹35.00
- ₹32.00
- 9%
- ₹32.00
- Overall you save ₹3.00 (9%) on this product
1. Output Power: 5mW
2. Working Voltage: 5V DC
3. Working temperature: -10 ℃~+40 ℃
4. Housing material: Copper
5. Working life: more than 2000 hours
6. Spot mode: Dot Facula (continuous output)
7. Laser wavelength: 650nm red-colored.
8. Operating current: <40mA
9. Power lead length: 120mm.
Weight | 0.06 kg |
---|---|
Dimensions | 3 × 3 × 2 cm |
Be the first to review “650NM Laser Diode” Cancel reply
Related Products
NE555 Timer Switch Adjustable Relay Board
1. Module based on the NE555 chip.
2. Input voltage: DC 12V
3. Adjustable time: 0-10 s
4. AC Control voltage: 250V/max. 10A
5. Max. load: 2200W
Male To Female Jumper Wires (20cm) – 40 Pieces
1. 40P color DuPont line
2. Length: 200mm
3. Weight: 30 gm
4. Compatible with 2.54mm spacing pin headers
5. 40pcs chromatic male to female color jump wire
6. High quality and in good working condition
7. Durable and reusable
8. Easy to install and use
2 Channel Relay Board 5V
1. No. of Channel: 2
2. Trigger Voltage: 5VDC
3. Triode drive, increasing relay coil
4. High impedance controller pin
5. Pull-down circuit for the avoidance of malfunction
6. Power supply indicator and Control indicator lamp
7. Power supply and relay instructions, lit, the disconnect is off;
8. The input signal, signal, common Terminal and start conducting;
Keypad 4*3 Membrane
1. Ultra-thin design & adhesive backing provides easy integration to any project
2. Excellent price-performance ratio
3. Easy communication with any microcontroller
4. 5 pins 2.54mm pitch connector, 4×3 type – 12 keys.
5. Sticker can peel off for adhesive mounting.
6. Operating Voltage (V): 12 DC
4 Channel Relay Board 5V
1. No. of Channel: 4
2. Trigger Voltage: 5VDC
3. Triode drive, increasing relay coil
4. High impedance controller pin
5. Pull-down circuit for the avoidance of malfunction
6. Power supply indicator and Control indicator lamp
7. Power supply and relay instructions, lit, the disconnect is off;
8. The input signal, signal, common Terminal and start conducting;
Female To Female Jumper Wires (20cm) – 40 Pieces
1. 40P color DuPont line
2. Length: 200mm
3. Weight: 30 gm
4. Compatible with 2.54mm spacing pin headers
5. 40pcs chromatic female to female color jump wire
6. High quality and in good working condition
7. Durable and reusable
8. Easy to install and use
8 Channel Relay Board 5V
1. Channel: 8 channel
2. Relay Operating Voltage: 5V
3. One normally closed contact and one normally open contact
4. Triode drive, increasing relay coil
5. High impedance controller pin
6. Pull-down circuit for the avoidance of malfunction
7. Power supply indicator and Control indicator lamp
8. Power supply and relay instructions, lit, the disconnect is off;
Male To Male Jumper Wires (20cm) – 40 Pieces
1. 40P color DuPont line
2. Length: 200mm
3. Weight: 30 gm
4. Compatible with 2.54mm spacing pin headers
5. 40pcs chromatic male to male color jump wire
6. High quality and in good working condition
7. Durable and reusable
8. Easy to install and use
1 Channel Relay Board 5V with Optocoupler
1. Channel – 1
2. Trigger Voltage (VDC) – 5
3. Switching Voltage (VAC) – 250@10A
4. Switching Voltage (VDC) – 30@10A
9V Battery Connector With DC Pin
1. Excellent material
2. It is an environmental 9V battery buckle
3. The Cable Length: 12cm Approx.
4. Convenient for connecting a battery to your application.
5. Save power and protect the environment
6. Good electrical conductivity and comfortable sense of touch
TTP223 Touch Sensor Module
1. Power supply voltage(VCC): 2.0, 3, 5.5 V.
2. Output high VOH: 0.8VCC V
3. Output low VOL: 0.3VCC V
4. Response time (touch mode) : 60 mS
5. Response time (low power mode) : 220 mS
6. Can replace the traditional touch of a button
7. Four M2 screws positioning holes for easy installation
330 Ohm 1/8W Through Hole Resistor (Pack of 5)
1. Resistance: 330 Ohm
2. Tolerance: ±5%
3. Max. Working Voltage: 250V
4. Temperature Coefficient of Resistance: 50PPM/°C
There are no reviews yet.