It is a 220 Ohm 0.25W Metal Film Resistor. This resistor is for through-hole applications.
220 Ohm 1/8W Through Hole Resistor (Pack of 5)
₹12.00 Original price was: ₹12.00.₹10.00Current price is: ₹10.00.
Price Summary
- ₹12.00
- ₹10.00
- 17%
- ₹10.00
- Overall you save ₹2.00 (17%) on this product
1. Resistance: 220 Ohm
2. Tolerance: ±5%
3. Max. Working Voltage: 250V
4. Temperature Coefficient of Resistance: 50PPM/°C
Weight | 0.01 kg |
---|---|
Dimensions | 0.45 × 0.35 × 1.9 cm |
Be the first to review “220 Ohm 1/8W Through Hole Resistor (Pack of 5)” Cancel reply
Related Products
100 Ohm 1/8W Through Hole Resistor (Pack of 5)
1. Resistance: 100 Ohm
2. Tolerance: ±5%
3. Max. Working Voltage: 250V
4. Temperature Coefficient of Resistance: 50PPM/°C
4 Channel Relay Board 5V
1. No. of Channel: 4
2. Trigger Voltage: 5VDC
3. Triode drive, increasing relay coil
4. High impedance controller pin
5. Pull-down circuit for the avoidance of malfunction
6. Power supply indicator and Control indicator lamp
7. Power supply and relay instructions, lit, the disconnect is off;
8. The input signal, signal, common Terminal and start conducting;
Male To Male Jumper Wires (20cm) – 40 Pieces
1. 40P color DuPont line
2. Length: 200mm
3. Weight: 30 gm
4. Compatible with 2.54mm spacing pin headers
5. 40pcs chromatic male to male color jump wire
6. High quality and in good working condition
7. Durable and reusable
8. Easy to install and use
8 Channel Relay Board 5V
1. Channel: 8 channel
2. Relay Operating Voltage: 5V
3. One normally closed contact and one normally open contact
4. Triode drive, increasing relay coil
5. High impedance controller pin
6. Pull-down circuit for the avoidance of malfunction
7. Power supply indicator and Control indicator lamp
8. Power supply and relay instructions, lit, the disconnect is off;
BC547 NPN DIP Transistor – 1 Piece
1. BC547 is a bipolar junction transistor (BJT).
2. It is kind of an NPN transistor.
3. It has three terminals: Emitter, Collector and Base.
4. The maximum current gain of BC547 is 800A.
10K Ohm 1/8W Through Hole Resistor (Pack of 5)
1. Resistance: 10K Ohm
2. Tolerance: ±5%
3. Max. Working Voltage: 250V
4. Temperature Coefficient of Resistance: 50PPM/°C
Motor Driver – L293D
1. The driver two holes of 3 mm dia.
2. Male burg-stick connectors for supply, ground and input connection.
3. Screw terminal connectors for easy motor connection.
4. High noise immunity inputs.
5. Operating Voltage(VDC): 4.5 to 12
6. Peak Current (A): 600 mA
7. No. of Channels: 1
NE555 Timer Switch Adjustable Relay Board
1. Module based on the NE555 chip.
2. Input voltage: DC 12V
3. Adjustable time: 0-10 s
4. AC Control voltage: 250V/max. 10A
5. Max. load: 2200W
9V Battery Connector With DC Pin
1. Excellent material
2. It is an environmental 9V battery buckle
3. The Cable Length: 12cm Approx.
4. Convenient for connecting a battery to your application.
5. Save power and protect the environment
6. Good electrical conductivity and comfortable sense of touch
Keypad 4*3 Membrane
1. Ultra-thin design & adhesive backing provides easy integration to any project
2. Excellent price-performance ratio
3. Easy communication with any microcontroller
4. 5 pins 2.54mm pitch connector, 4×3 type – 12 keys.
5. Sticker can peel off for adhesive mounting.
6. Operating Voltage (V): 12 DC
Male To Female Jumper Wires (20cm) – 40 Pieces
1. 40P color DuPont line
2. Length: 200mm
3. Weight: 30 gm
4. Compatible with 2.54mm spacing pin headers
5. 40pcs chromatic male to female color jump wire
6. High quality and in good working condition
7. Durable and reusable
8. Easy to install and use
2 Channel Relay Board 5V
1. No. of Channel: 2
2. Trigger Voltage: 5VDC
3. Triode drive, increasing relay coil
4. High impedance controller pin
5. Pull-down circuit for the avoidance of malfunction
6. Power supply indicator and Control indicator lamp
7. Power supply and relay instructions, lit, the disconnect is off;
8. The input signal, signal, common Terminal and start conducting;
There are no reviews yet.