MQ5 Gas Sensor – Natural gas, LPG
Highlights:
1. Model: MQ-5
2. Operating Voltage: 5V DC
3. Operating Temparature:-20~40 degree celcius
MQ6 Gas Sensor – LPG, butane
Highlights:
1. Model: MQ-6
2. Operating Voltage: 5V DC
3. Detecting Range:200-10000 ppm
4. Relative Humidity:<95% RH
MQ8 Gas Sensor – Hydrogen Gas
Highlights:
1. Using high-quality dual-panel design, with power indicator and TTL signal output instructions.
2. The switching signal having a DO (TTL) output and analog output AO.
3. TTL output valid signal is low.
4. The higher the voltage, the concentration of the analog output voltage is higher.
5. A hydrogen gas detection with good sensitivity.
6. Has a long life and reliable stability
₹110.00
MT3608 DC-DC Boost 2A Module
Highlights:
1. It’s efficient up to 93%
2. It can source a good amount of current
3. The maximum output current: 2A
4. Input voltage: 2V-24V DC
5. The maximum output voltage: 5V-28V DC
Nano Expansion Shield For Arduino
Highlights:
1. Compatible with Arduino NANO
2. All digital and analog pins breakout
3. Compact size;
4. External power supply current support
5. Leads all pins out, convenient for wiring and doing experiments.
NE555 Timer Switch Adjustable Relay Board
Highlights:
1. Module based on the NE555 chip.
2. Input voltage: DC 12V
3. Adjustable time: 0-10 s
4. AC Control voltage: 250V/max. 10A
5. Max. load: 2200W
NodeMCU ESP8266-12 CH340 Based
Highlights:
1. Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled
2. Arduino-like hardware IO
3. Integrated TR switch, balun, LNA, power amplifier and matching network
4. Integrated PLL, regulators, DCXO and power management units
5. Onboard USB to serial chip to easily program and upload codes from the Arduino IDE
6. Embeds logic level converter circuits
7. Has onboard 3.3V regulator to ensure enough power to function as your go-to WiFi chip!
8. Easy access to the GPIO pins for easy prototyping
9. ESP-12E Processor
10. Easy to use breadboard friendly form factor
NodeMCU ESP8266-12 CP2102 Based
Highlights:
1. Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled
2. Arduino-like hardware IO
3. Integrated TR switch, balun, LNA, power amplifier and matching network
4. Integrated PLL, regulators, DCXO and power management units
5. Onboard USB to serial chip to easily program and upload codes from the Arduino IDE
6. Embeds logic level converter circuits
7. Has onboard 3.3V regulator to ensure enough power to function as your go-to WiFi chip!
8. Easy access to the GPIO pins for easy prototyping
9. ESP-12E Processor
10. Easy to use breadboard friendly form factor
NRFL24L01 Adaptor Board
Highlights:
1. It can be used with NRF24L01 wireless module
2. Add core nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
3. Onboard 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
4. Allows for easy connection to nRF24L01+ modules
5. Small power on SMD LED indicator
NRFL24L01 Transreceiver Module
Highlights:
1. Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,
2. Particularly suitable for industrial control applications.
3. Built-in hardware CRC error detection, Multipoint communication address control.
4. Low-power 1.9 ~ 3.6V, only 1uA on Power down mode
5. Built-in 2.4Ghz antenna
6. Built-in voltage regulator
7. Standard DIP Pitch Interface for embedded applications
NRFL24L01 Transreceiver Module w/ Antenna
Highlights:
1. Voltage: 3-3.6V (recommended 3.3V) V.
2. Maximum output power: +20dBm.
3. Power-down mode current: 4.2uA.
4. Operating Range: 1Km
5. Antenna Gain (peak): 2Dbi.
6. 2MB rate (Open area): 520m.
7. 1MB rate (Open area): 750m.
8. 250Kb rate (Open area): 1100m.
9. It uses 2.4GHz global open ISM band, with license free.
10. SPI interface facilitates the communication with MCU I/O port.
NTC Temprature Sensor module
Highlights:
1. Adopt the NTC thermistor sensor, sensitivity is good
2. The comparator output, signal clean, good waveform, driving ability is strong, for more than 15 ma.
3. With potentiometer to adjust the temperature detection threshold
4. Working voltage: 3.3 V to 5 V
5. Output form: digital switch output (0 and 1)
6. It has a fixed bolt hole, convenient installation