MQ8 Gas Sensor – Hydrogen Gas
1. Using high-quality dual-panel design, with power indicator and TTL signal output instructions.
2. The switching signal having a DO (TTL) output and analog output AO.
3. TTL output valid signal is low.
4. The higher the voltage, the concentration of the analog output voltage is higher.
5. A hydrogen gas detection with good sensitivity.
6. Has a long life and reliable stability
NTC Temprature Sensor module
1. Adopt the NTC thermistor sensor, sensitivity is good
2. The comparator output, signal clean, good waveform, driving ability is strong, for more than 15 ma.
3. With potentiometer to adjust the temperature detection threshold
4. Working voltage: 3.3 V to 5 V
5. Output form: digital switch output (0 and 1)
6. It has a fixed bolt hole, convenient installation
Pir Sensor HC-SR501
1. Wide Working Voltage Range: DC 4.5V- 20V
2. Current Drain: <60uA
3. Detection Angle: <140°
4. Detection Distance: 3 to 7m (can be adjusted)
5. Blockade time: 2.5s (Default)
6. Work temperature: -20-+80°C
Pulse Sensor – Heart Rate Detector
1. A Color-Coded Cable, with a standard male header connectors. Plug it straight into an Arduino or a Breadboard. No soldering is required.
2. The Pulse Sensor has 3 holes around the outside edge which make it easy to sew it into almost anything.
3. Visualization software (made in Processing) to instantly see the output of the sensor and for troubleshooting.
Rain Drop Sensor
1. Operating voltage: 5V
2. Provide both digital and analog output
3. Adjustable sensitivity
4. Output LED indicator
5. Compatible with Arduino
6. TTL Compatible
7. Bolt holes for easy installation
Raspberry Pi Camera – 5MP
1. Resolution: 5 MP
2. Interface Type: CSI(Camera Serial Interface)
3. Dimensions: 25x23x8 (LxWxH) mm
4. Supported Video Formats: 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 video
5. Fully Compatible with Raspberry Pi 3 and 4 Model B
6. Plug-n-Play camera for Raspberry Pi 3 and 4 Model B.
Soil Moisture Sensor
1. Dual output mode, analog output more accurate
2. A fixed bolt hole for easy installation
3. With power indicator (red) and digital switching output indicator (green)
4. Having LM393 comparator chip, stable.
5. Operating Voltage: 3.3V~5V
Sound Sensor Module
1. Main chip: LM393, Electret condenser microphone
2. Working voltage: DC 3.3-5V
3. Induction distance is 0.5M
4. Signal output Indication
5. Single channel signal output
6. The output effective signal is low level.
TCRT5000 SENSOR Module
1. Operating Voltage: 3.5V-5V
2. Supply Current: 15mA
3. Optimal Sensing Distance: 3mm
4. Designed with the reflected infrared sensor, indicator light.
5. Built in a potentiometer for sensitivity control.
6. On-board LM393 voltage comparator chip and infrared sensing probe TCRT5000L
7. Signal detection sensitivity can adjust
8. Reserve all the way more circuits (P3 voltage drawn)
TCS3200 Color Sensor Module
1. Operating Voltage: 3V-5V
2. High-resolution conversion of light intensity to frequency.
3. Chip pins all has drawn for standard 100.
4. Put the needle (2.54 mm).
5. Mil-convenient for bitmap board.
6. Programmable color and full-scale output frequency.
7. Communicate directly with a microcontroller.
8. Low-profile surface mount package.
TILT SENSOR SW420
1. Using SW-420 normally closed type vibration sensor
2. Comparator output, clean signal, good waveform, strong driving ability, >15mA
3. Operating voltage 3.3V ~ 5V
4. Output format: digital switching output (0 and 1)
5. Using a wide voltage LM393 comparator
6. With bolt holes for easy installation
TSOP Sensor Module KY-022
1. Dimension: 2.5 x 1.5 x 1.5 cm.
2. Receiving angle: 90 °.
3. Working voltage: 2.7 ~ 5.5V.
4. Frequency: 37.9KHz
5. Receiving range: 18m.
6. Weight: 4 gm.