The LilyPad ATtiny85 Digispark Wearable Device is a tiny LilyPad board designed to be flashy yet functional without taking too much space. Small but smart as well, this board has a ATtiny mircroncontroller which you can sew 4 LEDs and connect a battery for blinky projects.
If you’re an advanced user and want to re-program the LilyTiny, the ICSP programming connectors are broken out on the bac
Arduino Lilypad Attiny85 – Compatible
₹405.00 ₹418.00
Price Summary
- ₹418.00
- ₹405.00
- 3%
- ₹405.00
- Overall you save ₹13.00 (3%) on this product
1. Miniature ATtiny85 microcontroller
2. Wearable
3. Dimensions: Diameter 25mm
4. CJMCU-ATTINY85 miniature microcontroller development board
5. 8K Byte of In-System Programmable Program Memory Flash
6. 512 Bytes In-System Programmable EEPROM
7. 512 Bytes Internal SRAM
Be the first to review “Arduino Lilypad Attiny85 – Compatible” Cancel reply
Related Products
Arduino Pro Mini 3.3V / 8M – Compatible
1. Microcontroller: ATmega328
2. Circuit Operating Voltage: 3.3V
3. Clock frequency: 8MHz.
4. Digital I/O Pins: 14
5. 8 analog input port: A0 ~ A7.
6. A pair of TTL level serial port transceiver : RX / TX.
7. 6 PWM port: D3, D5, D6, D9, D10, D11.
8. Support serial download.
Arduino Mega2560 With ESP Wifi (CH340)
It is a customized version of the classic ARDUINO MEGA R3 board. Full integration of Atmel ATmega2560 microcontroller and ESP8266 Wi-Fi IC, with 32 Mb (megabits) of flash memory, and CH340G USB-TTL converter on a single board! All components can be set up to work together or independently.
Data Logging Shield For Arduino
1. SD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents damage to your SD card.
2. Real-time clock (RTC) keeps the time going even when the Arduino is unplugged. The battery backup lasts for years.
3. Included libraries and example code for both SD and RTC mean you can get going quickly Prototyping area for soldering connectors, circuitry or sensors.
4. The onboard 3.3v regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run.
5. A dedicated and well-designed data logging shield for Arduino.
Arduino Mega 2560 – CH340 Compatible
1. 54 digital input / output terminals (14 of which have programmable PWM outputs).
2. 16 analog inputs.
3. 4 UARTs (hardware serial ports).
4. 16 MHz crystal clock.
5. Operating voltage: 6 ~ 12v.
6. Dimensions: 110 x 53 x 15 mm.
Arduino 33 IOT
1. Microcontroller: SAMD21 Cortex-M0+ 32bit low power ARM MCU
2. Radio module: u-blox NINA-W102
3. Secure Element: ATECC608A
4. IMU: LSM6DS3
5. Clock Speed: 48MHz
6. Operating Voltage: 3.3V
Arduino Pro Micro 5v/16M – Compatible
1. ATMEGA32U4 running in 5V / 16MHz
2. Support Arduino IDE V1.0.1
3. Micro USB interface programming on the board
4. Four 10-bit ADC pin
5. 12 digital I / O (5 PWM capability)
6. Rx and Tx hardware serial connection
Nano Expansion Shield For Arduino
1. Compatible with Arduino NANO
2. All digital and analog pins breakout
3. Compact size;
4. External power supply current support
5. Leads all pins out, convenient for wiring and doing experiments.
Arduino UNO SMD CH340 – Compatible
1. Micro-controller : ATmega328.
2. Operating Voltage : 5V.
3. Input Voltage (recommended) : 7-12V.
4. Digital I/O Pins : 14 (of which 6 provide PWM output).
5. Analog Input Pins : 6.
NodeMCU ESP8266-12 CP2102 Based
1. Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled
2. Arduino-like hardware IO
3. Integrated TR switch, balun, LNA, power amplifier and matching network
4. Integrated PLL, regulators, DCXO and power management units
5. Onboard USB to serial chip to easily program and upload codes from the Arduino IDE
6. Embeds logic level converter circuits
7. Has onboard 3.3V regulator to ensure enough power to function as your go-to WiFi chip!
8. Easy access to the GPIO pins for easy prototyping
9. ESP-12E Processor
10. Easy to use breadboard friendly form factor
L298P Motor Driver Shield
1. L298P based Arduino motor driver shield
2. Onboard Buzzer (D4).
3. Onboard Bluetooth interface, you can directly plug, no wiring required.
4. Six Analog interface.
5. Forward, Backward steering indicators
JoyStick Shield Module
1. 2-Axis joystick
2. Bluetooth / Serial interface
3. I2C interface
4. nRF24L01 interface
5. Nokia 5110 LCD interface
6. Interface connector
7. Power switch to switch between 3.3 and 5V
Arduino Nano CH340 – Compatible
1. Operating Voltage (logic level): 5V
2. 8 analog inputs ports: A0 ~ A7
3. 14 Digital input / output ports: TX, RX, D2 ~ D13
4. 1 pair of TTL level serial transceiver ports RX / TX
5. Using Atmel Atmega328P-AU MCU
6. Standard 0.1” spacing DIP (breadboard friendly).
There are no reviews yet.